Listen Now

Well the take over is taking time.  We are slowly working through all the things that it takes to make a podcast possible.  We have the recording part down and have a total of 9 episodes ready to be released.  They are just needing to be edited.  I know we have at least one more episode with audio issues, but Darryl seems to have gotten a lot of them worked out in this one.  The biggest issue was a microphone that needed to be repositioned, it was directional and facing the wrong way.  Once that was discovered our future audio is fantastic.  Stick with us.  We are getting our rhythm and with future guests coming up, you will not want to miss out.  The No Forge Challenge is now Complete with 6-7 entries and pretty sure everyone is a winner.  Super cool prizes.  The video needs to be made and sent to the judges.  Hopefully today.  Have an awesome day everyone.  

In this episode we talk about where we have been, changes in the podcast and what you can expect going forward.        The Making Time Podcast and Ennologic.com are proud to announce the 2018 No Forge Maker Challenge. Challengers are task to build something out of metal without the aid of a commercial forge. This means that part of your build must require the metal to be heated. This could include something as simple as heating a bar with a map gas torch then bending it to create drawer pulls, or crafting a custom knife from a raw bar of steel. You can build a makeshift charcoal forge, a coffee can propane forge, or just toss some metal into a fire and heat it enough to make it submit to your will.   The No Forge Challenge will take place over a 30-day period, (Through September 30th), and is open to anyone willing to take on the challenge. Challengers are required to document their project with photos or videos, and their entries must be submitted to the Making Time Website by 11:59PM Sept 30, 2018. Judging will take place over the next 15-days, and we will announce the winner live on YouTube on Saturday October 20th. All Prizes are sponsored by Ennologic.com, Paul Pinto, Starbond, and The Making Time Podcast. First Place -    Traditional Blacksmithing Hammer By Paul Pinto Blacksmithing Ennologic  eT1050D Dual Laser Infrared Thermometer Ennologic Moisture Meter Making Time Powdercoated Stainless Tumbler Guest Appearance On The Making Time Podcast   Second Place - Ennologic eT1050D Dual Laser Infrared Thermometer  Ennologic Moisture Meter  Making Time Powdercoated Stainless Tumbler   Third Place - Ennologic  eT1050D Dual Laser Infrared Thermometer          Starbond CA Glue Kit   Fourth Place - Ennologic  eT1050D Dual Laser Infrared Thermometer Starbond CA Glue Kit   Fifth Place - Ennologic  eT1050D Dual Laser Infrared Thermometer Starbond CA Glue Kit   JudgingEric Leong - Forged in Fire Runner Season 3, Episode 6 Runner Up Paul Brach - Forged in Fire Runner Season 4, Episode 12 Runner Up Mark Hopper Forged In Fire Season 5, Episode 6 ChampionJessica Collins  Forged in Fire Season 5, Episode 6 Champion   Links to Everyone Involved in the Challenge Mark and Jessica Forged In Fire Champions from Goat & Hammer Forge http://www.goatnhammer.com/ https://www.instagram.com/goatnhammer/ Paul Brach  Forged in Fire Runner Up  http://www.brachknives.com/ https://www.instagram.com/paul_brach/ Eric Anthony Leong  Forged In Fire Runner Up https://www.instagram.com/djericanthonyatlanta/ http://www.ericanthonyproductions.com/ Ennologic.com https://ennologic.com/product/dual-laser-infrared-thermometer-et1050d/   Forging Hammer Hand Made by Paul Pinto https://www.paulpintoblacksmithing.com/product-page/the-traditional Check him out on Youtube and Instagram   https://www.youtube.com/channel/UCBhILhv3oLsujP15pLc34TQ/about https://www.instagram.com/paulpinto1124/      

Making Time: Episode 20 - Limited Liability, Nuts by the Pound, and Squeaky Beds In this episode of The Making Time Podcast Darryl Jones, Chad Grosklags, and Charles Gantt talk about limited liability, nuts by the pound, and squeaky beds.  Small Talk Chad:  My family had the week off for Spring Break and most of the time that I wasn’t at work I spent with them.  It’s crazy how when your kids start getting older, family time is very segmented.  I’m lucky to have one of the two home at a time.  Worked a typical week and on my only day off I spent it cleaning junk that I have been ignoring out of the backyard.  I made my wife happy.  I also created a space to store the slabs that I came into last week.  throw to Darryl.  Charles:  It’s Masters Week here which means a 500% increase in traffic, which means longer commute times, and big headaches all around.  Darryl: youtube video, llc appointment      Working On Chad: I’m working on a couple of orders for several customers.  We did a few two color tumblers and I have several to laser etch.  I really tried to spend very little time in the shop this week.  I really wanted to give my family the family all my spare time.   Darryl: finishing my accountability items… finally Charles: New desk for workshop, Chainsaw Sharpening Maker’s Roundtable Darryl: Working with out a plan Chad: Puting T slot on my Shapeoko compliments of Ed Ford.  I’ve had it for a while and I’ve just finally got it on the old wasteboard.  I can’t wait to try to and hold multiple objects in a row and not have to glue everything down.    Charles: Bolts and Nuts by the pound at Tractor Supply “Menards too”, Klingspor Care Package Our Patrons We would like to thank our patrons for making time to be a part of our podcast, and for helping us grow the podcast into something bigger than we could have ever imagined it would become. If you would like to help support our podcast and help us grow, please consider becoming a patron at patreon.com/makingtime. We have some wonderful perks for our patrons, and we will add more as we continue to grow.  This Month's Top Patrons Sean McHenry of D.I.Wyatt Custom Woodworks Michael Brindel of M13 WoodWorks Main Topic:     Making Time : How do you make time to make? What things get in the way and how do you deal with those distractions? What kind of strategies do you employ to ensure that you get some work done?      Accountability Last Week’s List: Charles: 2 Podcast Edited, 3 Articles for Element14 Darryl: finish bookcase, catch up on the mail (Scott if you’re listening I got you buddy) Chad:  Videos edited, one posted.  Continue to stay current on mailing of stickers and start acquiring the parts and materials to build a 2 x 72 Belt Grinder/Sander.  I’ve heard it both ways.     Results? Chad:  I did nothing on the videos.  Shaking my head…  Mailings are current.  I have researched for days the parts I needed.  I now know exactly what I need, and before ordering, I am trying to work with the companies to see if I can get the build sponsored. Currently working on the letter to really deal with them. Charles: 1 Podcast Edited , Articles finished.  Darryl: caught up on the mail; bookcase stained and ready for finish   Predictions for next week: Chad: Taxes, video and contact 3 sponsors if charles gets his crap together. Charles: Catch up On Podcast Editing, Finish Cleaning Shop, Vehicle Maintenance.  Darryl: Finish bookcase and daycare cabinet   Listener Question(s) Latt Moomis: What are some good design elements to include in a bed frame so it doesn't squeak… You know, for restless sleepers.      Maker Spotlight  Justin Uppole: Instagram: https://www.instagram.com/upwoodworks/ YouTube: https://www.youtube.com/channel/UCsdfgsaJLminSrVLiy8Zgaw Links: Wen Track Saw: https://amzn.to/2JDpmPj  (Affiliate Link) Unit Conversion Chart: http://bit.ly/2HEzR8I

Making Time: Episode 19 - Making Time Episode 019 - Free Slabs, Goats with Hammers, and The Great CNC Debate In this episode of Making Time, Darryl Jones, Charles Gantt, and Chad Grosklags talk about Free Slabs, Goats with Hammers, and we will finally answer once and for all the age-old question: "Is CNC work actually woodworking." Our Patrons We would like to thank our patrons for making time to be a part of our podcast, and for helping us grow the podcast into something bigger than we could have ever imagined it would become. If you would like to help support our podcast and help us grow, please consider becoming a patron at patreon.com/makingtime. We have some wonderful perks for our patrons, and we will add more as we continue to grow.  This Month's Top Patrons Sean McHenry of D.I.Wyatt Custom Woodworks Michael Brindel of M13 WoodWorks   Maker Spotlight Goat N Hammer Web: http://www.goatnhammer.com/ Where To Find Our Hosts For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Instagram. You can follow Chad at MancraftingTM.com and on Facebook, Instagram, and YouTube. You can follow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.  

Making Time: Episode 18 - Woodworking Show ATL & a New Host: Show Notes In this episode of Making Time, Darryl Jones, Charles Gantt, and Chad Grosklags recap their recent trip to The Woodworking Shows Atlanta 2018, and we officially welcome Chad as our new co-host. If you like the podcast consider becoming a patron for as little as $1 and help us continue to make this podcast as well as travel to events. We want to thank our patrons: Sean McHenry of D.I.Wyatt Custom Woodworks Michael Brindel of M13 WoodWorks   A new host Before we get started with this episode, I wanted to take a moment and talk about some recent changes here on the podcast. As you have noticed, Chad Grosklags is once again sitting in the co-host seat, and that is because Mike has decided to step away from the podcast. His decision was not a spur of the moment thing, but was rather a calculated move that will allow him to focus on some other opportunities that have came into his life recently. Darryl as well as myself wish Mike the best, and we hope to see him return to the community in the future. Mike did want us to let everyone know that he appreciates all of the friendships and support the community has given him over the years, and that his decision to step back was a necessary one. With that said, we would like to announce that Chad has agreed to take over Mike’s roll here at Making Time, and will be a part of the trio from here moving forward. So without further adieu, Welcome to the podcast Chad.  What the guys are working on: Darryl: Producing and editing video content Chad:  Cups for Makers International, The Makers Workbench, and Making Time Charles: I haven’t had much time to make anything because I have been playing catch up with my Element14 work because of the trip to Atlanta. I did just launch my 1k follower giveaway on Instagram, and I have been working on cleaning up the shop, so that I can make some videos around the tools I bought in Atlanta.    Makers' Roundtable  Darryl: Turqouise inlace CA glue Charles: New Raspberry Pi 3 Model B+ Chad: Cup with lead ball in it.      Accountability Predictions From Last Week: Charles: Getting ready for Wood Working Shows Atlanta 2018 Darryl:  Continue the ongoing saga of unfinished objectives and clean the shop (or some version of) Chad: Makers Central Tumblers Shipped, Making TIme Tumblers Done, Makers Workbench tumblers done, Southern Woodworkers Tumbler done, Power Point for Atlanta Wood Working Show. Results From Last Week? Charles: Accomplished Darryl: I did clean the shop, failures all around otherwise Chad: I have to say that I am surprised to say that I actually accomplished all of  Predictions for next week: Charles:Update Website Info, Sonoff Switch Extension Cord Project, Launch 1k Follower Giveaway Darryl: Armoires, bookshelf Chad: Get all of my stickers mailed out. Believe it or not, this will be a much bigger challenge than last weeks. I also need to get at least one video up by the next recording. I also have a promo and and a maker interview video to get done. Listener Questions Ryan Ridgley:  If you put out a product that you might not be a fan of or that you are disappointed in, but the customer loves it, is it a win or a loss? (Personally, though I may be disappointed, the client is happy so I did my job, there is always next time right? No sense in beating myself up when I am the only one disappointed in myself).   Marc Schaefermeyer: Do you ever wish there were more electronics parts sold at the remaining brick and mortar stores? I'm in need of a JST XH connector and lack of options to buy locally is limiting. How to you plan for this kind of delay in projects?   Michael Chipser: If you were making cutting boards to sell what kind would you make.. face grain, edge grain, or end grain.. or a slab I guess..   Maker Spotlight Chad Grosklags (Mancrafting) Web: https://mancraftingtm.com/ YouTube: https://www.youtube.com/channel/UCXqSutxcDzg-oeDmPAG5KEg Facebook: https://www.facebook.com/ManCrafting101/ Instagram: https://www.instagram.com/mancrafting Links: New Raspberry Pi 3: http://themakersworkbench.com/articles/raspberry-pi-3b-released-specs-inside   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Chad at ManCraftingTM.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

In this episode of Making Time Darryl Jones, Charles Gantt, and Chad Grosklags talk about recent builds, the upcoming WoodWorking Shows Atlanta 2018, and answer your listener questions.  If you like the podcast consider becoming a patron for as little as $1 and help us continue to make this podcast as well as travel to events. We want to thank our patrons: Sean McHenry of D.I.Wyatt Custom Woodworks Chad Grosklags of Mancrafting  What the guys are working on: Darryl: more bowls, a couple of videos Chad:  I have several videos that I’ve committed to doing as well as a presentation at the Atlanta woodworking show and a couple of welding projects.  Thats in addition to to the cups I already mentioned.  Charles: I Tried to turn two bowls over the weekend, and if you follow my Instagram and Facebook stuff, you know how that turned out. I cut the bottom of the salad bowl I was building too thin, and launched another, much smaller bowl across the workshop.  Makers' Roundtable  Darryl: almost bowl failure and the saviors aka CA Charles: 1000 Follower Giveaway launching after AWWS 2018 (around the time this podcast is live)  New Design Challenge Announced at Element14, submit your project idea to get sponsored with the hardware to make it. Chad: I’m going to Makers Central, Just went to WBC. Patreon Supporters Sean McHenry of D.I.Wyatt Custom Woodworks Chad Grosklags of Mancrafting  Predictions From Last Week: Charles:  No fun this week: TAXES Darryl:  Finish armoires and bookcase. No Pen for Zach, new playlist Mike: Wasteboard for SO3, Turn samples for local shop, design and cut house numbers sign - inlaid. Drew: Finish horse signs, catch up on orders, Maybe…… start craft show stuff   Results From Last Week? Charles: Taxes Finished Darryl: total Fails! Mike: Unknown Drew:So I got a lot down on horse sign still working on them. Stayed up last night til 2 working on them. Tonight will be the same. Orders are caught up. No on craft show stuff But......The orders were 4 things so that has to count Predictions for next week: Charles: Getting ready for Wood Working Shows Atlanta 2018 Darryl: continue the ongoing saga of unfinished objectives and clean the shop (or some version of) Chad: Makers Central Tumblers Shipped, Making TIme Tumblers Done, Makers Workbench tumblers done, Southern Woodworkers Tumbler done, Power Point for Atlanta Wood Working Show.  Listener Questions Sean McHenry:  Favorite wood to turn..and why? Richard Ash: Is it better to stay with one area to work in, leather, metal, wood, anything. Or you cover as many as you can. Curtis Gauger: What are the challenges of managing two business.  Especially one being creative and the other more customer oriented Maker Spotlight Chad Grosklags (Mancrafting) Web: https://mancraftingtm.com/ YouTube: https://www.youtube.com/channel/UCXqSutxcDzg-oeDmPAG5KEg Facebook: https://www.facebook.com/ManCrafting101/ Instagram: https://www.instagram.com/mancrafting Links: Bluetooh Unleashed Design Challenge at Element14.com: https://www.element14.com/community/community/design-challenges/bluetoothunleashed?ICID=DCH-featured-top3challenges Chad’s other business: http://www.bugspray.com   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones talk to Drew Oxford of Ox in the Shop about craft fairs and Making for retail sales at shows. If you like the podcast consider becoming a patron for as little as $1 and help us continue to make this podcast as well as travel to events. We want to thank our patrons: Sean McHenry of D.I.Wyatt Custom Woodworks Chad Grosklags of Mancrafting   What the guys are working on: Mike:  French cleat tool wall and Nick Ferry crosscut and miter sled. Charles:  Cutting Bowl Blanks with new Husqvarna 450e Rancher Chainsaw, Kaizen Foam custom inserts for electronic workbench, Design Challenge Week six. Darryl:  Making another salt cellar and other small turnings. Rearranging the shop. Drew:  Finishing horse farm signs and custom orders, and a few youtube video projects.   Makers' Roundtable  Mike: Listener Contest: Build something for the office. Business card holder, desk name plate, desk clock, pen holder, desk organizer, monitor stand, etc, etc. Darryl: possible new turning class locations Charles: 1000 Follower Instagram Giveaway: Sponsored by Lizzard Blanks & RZ Mask, and Upcoming Raspberry Pi Jam 6th Birthday World Wide Event March 3-4   Patreon SupportersSean McHenry of D.I.Wyatt Custom Woodworks Chad Grosklags of Mancrafting   Guest: Drew Oxford of Ox in the Shop  Drew answers questions that were sent in by listeners on Making for craft shows and retail sales.   Maker Spotlight Drew Oxford - Ox in the Shop Web: https://www.OxintheShop.com YouTube: https://www.youtube.com/channel/UC3nXHtty_xEbKlTIDaQ940A Facebook: https://www.facebook.com/oxintheshop/ Twitter: https://twitter.com/oxintheshop Instagram: https://www.instagram.com/oxintheshop/   Accountability Results? Mike: Wasteboard not done, Floating shelf done, some progress on french cleat wall. Charles: Video Editing Finished, Accountability Score Board Finished, Pens Finished after podcast recording ends. Darryl: ?   Predictions for next week: Mike: Wasteboard for SO3, Turn samples for local shop, design and cut house numbers sign - inlaid. Charles: No fun this week: TAXES Darryl: Still working on the previous weeks. Drew: Finish horse signs, catch up on orders, Maybe…… start craft show stuff.   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss the Southern Woodworkers with Zach Manring (Southern Ginger), the Atlanta Woodworking Show, and legalities of endorsements. If you like the podcast consider becoming a patron for as little as $1 and help us pay the bills. Become a Patron for as little as $1 a month. We want to thank our patrons: Sean McHenry of D.I.Wyatt Custom Woodworks.   What the guys are working on: Mike: Covered wood storage, finished installing OSB, painted walls (flat white), french cleat, tool wall. Charles: Video Editing with Premiere Pro CC, New Electronics Workbench Shelf with LED lighting, and Camera Slider Planning Darryl: making duck calls, making spheres, practicing ring boxes for show. Zach: Sick, youtube video Freakin Laser beams! Smoke exhaust and more! Makers Rock Project.   Makers' Roundtable  Mike: ?Shop floor, side lighting, camera mounting? Charles: Color Grading Videos in Premiere Pro CC using Lumetri Color Darryl: Tampa woodworking show Zach: Carved. CNC wood carved and stabilized. Resin burl. Have you guys tried wood based phone cases? (Fish tank problems)   Zach: Upcoming Atlanta woodworking show. 3rd major show (1st we had 200 members), 1000 members. Come out and chill with folks in the community, youtubers, instagrammers. Finished teardrop, lots of giveaways.   Maker Spotlight: Zach Manring https://www.facebook.com/southerngingerworkshop https://www.instagram.com/southerngingerworkshop   Listener Question(s) David Simmons What tips and tricks do you have to keep your shop organized during builds? Justin Uppole What is your least favorite tool and why?   Episode Links https://www.ftc.gov/news-events/audio-video/video/endorsement-guides https://www.ftc.gov/tips-advice/business-center/guidance/ftcs-endorsement-guides-what-people-are-asking#SocialNetworkingSites www.Southernwoodworkers.com https://www.facebook.com/groups/southernwoodworkers/ www.Carved.com https://www.facebook.com/events/161639217768887/ https://diwyattcustomwoodworks.com/ https://www.facebook.com/sean.mchenry.5   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

Making Time Episode 013 - Shop Tech, Patreon, and Account-Hillbilly In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss technology in the shop, making your own hand tools, Patreon, and designing an industrial desk. If you like the podcast consider becoming a patron for as little as $1 and help us pay the bills. Become a Patron for as little as $1 a month. What the guys are working on: Mike: Neje 500mW laser (EzGraver on GitHub), some progress on the shop, updates and additions to the website. Charles: Updates to Making time Website, Seeinci Mill One V2 and Prusa i3 MK2 Review Videos. Darryl: Getting ready for the show this weekend. Practicing turning projects. Thompson tool handles. Makers' Roundtable  Mike: Patreon https://www.patreon.com/makingtime As little as $1 Charles: New industrial style office desk from hardwood - Ideas for legs? Darryl: Removable steel with my new handles. Listener Question(s) Jerill Vance: What prompted you to start Woodworking? When? How have you learned most of your skills? Episode Links EnGraver: https://github.com/camrein/EzGraver Seinci Mill One V2  https://sienci.com/product/sienci-mill-one-kit/ Prusa i3 Mk2: https://shop.prusa3d.com/en/3d-printers/59-original-prusa-i3-mk2-kit.html Charles’ First Easel Project: https://www.inventables.com/projects/fluffy-wine-bottle-rack--2   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

Making Time Episode 012 - A New Gig, Accountability, and What We're Wearing In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss The Woodworking Shows, Documenting Projects, and Accountability. If you like the podcast consider becoming a patron for as little as $1 and help us pay the bills. Become a Patron for as little as $1 a month. What the guys are working on: Mike: Closet built-in - Under bid!, VACATION, Trying to set up OctoPi  Charles: New weekly video series on YouTube channel & new design challenge at Element14 Darryl: DVD cabinet, kitchen table, Murphy-bed cabinets. Makers' Roundtable  Mike: Southern Woodworkers Lollygag in Lithia Springs, Ga {Fred’s Bar-B Q House} Woodworking Shows in Atlanta 3/16-18 {Cobb Galleria Center} Charles: Blessing Box Update Darryl: Demonstrating at the Tampa and St. Louis woodworking shows   Featured Maker:  Mike Grimm of Reaper Woodworks YouTube Facebook   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

Making Time Episode 011 - A Wedgie, a Slump, and a Casket In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss segmented turning jigs, surviving the off-season slump, and what wood they'd use for their own caskets (thanks Rag Tie!). If you like the podcast consider becoming a patron for as little as $1 and help us pay the bills. Become a Patron for as little as $1 a month. What the guys are working on: Mike: FAILED burl cap and PATIENCE Charles: Blessing Boxes, Bora WTX Edge Clamp and Saw Guide AKA the Poor Mans Track Saw Darryl: Getting started with the CNC; still working on commissions; fixed my pens Makers' Roundtable  Mike: Carbide3D shipping new controller board + updated z-axis plate at no charge Charles: Prusa I3 MK2 and the Sienci Mill One Reviews coming up! Darryl: Wedgie sled segmented bowls   Featured Maker:  Ryan Ridgley of Barn Rat Studio Website YouTube Facebook   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

Making Time Episode 010 - Maker Gifts, Burnout, and the Traveling Turner In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss gifts FROM Makers and gifts FOR Makers, what to do about burnout, and Carl Jacobson's GoFundMe campaign. If you like the podcast consider becoming a patron for as little as $1 and help us pay the bills. Become a Patron for as little as $1 a month. What the guys are working on: Mike: Closet install, Lifesaver Award plaques Charles: Little free pantries, urn faceplate, Making Time website update Darryl: Christmas commissions, first segmented bowl Makers' Roundtable  Mike: Center for Furniture Craftsmanship 9-month Comprehensive Program - Rockport, Maine Charles: Dealing with getting burnt out Darryl: Shop visit with Cutthroat Woodworks   Featured Maker:  Carl Jacobson’s Mobile Makerspace GoFundMe Campaign YouTube   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

Making Time Episode 009 - Purple Heart. Green Wood, and Getting Uncomfortable In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss Rob Cosman's Purple Heart Project, prepping green wood for turning, and getting out of your comfort zone as a Maker. If you like the podcast consider becoming a patron for as little as $1 and help us pay the bills. Become a Patron What the guys are working on: Mike: Deciding on a new workbench Charles: Woodturning for an upcoming craft show and a Death Star ornament. Darryl: Cleaning up and organizing the shop Makers' Roundtable  Mike: Purple Heart Project Charles: Cutting turning blanks and sealing green wood Darryl: Nova DVR drillpress   Featured Maker:  Jeff Chaffin of Southern Rustic Woodworking Instagram  Facebook   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.  You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

Making Time Episode 008 - Nail Bowl. Turning is Life, and Carolina Roll Call In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss turning tools, lathe chuck setups. sharpening setups, and thank everyone from the Klingspors meetup in Hickory. NC. If you like the podcast consider becoming a patron for as little as $1 and help us pay the bills. Become a Patron   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.   You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

Making Time Episode 007: LIVE at Klingspor's Woodworking Extravaganza 2017 In this LIVE episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones sit down with Russ and Cameron Clarridy, Logan Sumrell, and Chris Stinson at the Klingspor's Woodworking Extravaganza 2017 in Hickory, North Carolina. The group discusses the event, young(er) Makers, and our first CHALLENGE! Details on the challenge can be found on the website (MakingTimePodcast.com) or on the facebook page (facebook.com/makingtimepodcast ). You can find Russ Clarridy by at SimplyWoodenCreations.com You can find Logan Sumrell on Instagram as @PoundsOfWood You can find Chris Stinson on Instagram as @the_hobbyist_workshop   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.   You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.  

Making Time Episode 005 - Cupcakes, Maker Faire, and a Box In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss Maker Faires, the Great American Eclipse, and Make with Dad. Maker Roundtable Maker Faire Mann Tool and Supply Instructables.com Box Contest 2017 Channel Highlight Make With Dad     For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.   You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube. Please subscribe to receive all new episodes!

Making Time Episode 004 - Studs, Estate Sales, and The Doctor In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss how and where to find deals on tools to build out your shop, Intel abandoning Curie, new woodturners, and Ashley Grenon - Handmade with Ashley. Maker Roundtable Birmingham ArtWalk Intel announces end of Curie Channel Highlight Handmade with Ashley     For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.   You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

  Making Time Episode 003 - Mental Databases, Clones, and a Pallet In this episode of Making Time Mike Jeffcoat, Charles Gantt, and Darryl Jones discuss interesting places to find inspiration and materials, Arduino clones, shop-made finishes, a podcast challenge, and the 2017 Pallet Upcycle Challenge. Topic Related Charles' Tutorials on Element 14 Maker Roundtable Shop Goodwill Online Habitat for Humanity ReStores Skycraft Surplus Video Highlight 2017 Pallet Upcycle Challenge     For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.   You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

Episode 2 - Obstacles, IOT, and Skulls In the second episode of Making Time the hosts, Mike Jeffcoat, Charles Gantt, and Darryl Jones, discuss their #1 obstacles to getting into the shop to Make and ways to address them, Intel and the Internet of Things, the Yi 4K Action Cam, a PSI lathe chuck, and Shogun Jimi's "Skull Challenge 2017."     You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.

  Episode 001 - Introductions In the first episode of Making Time the hosts, Mike Jeffcoat of Leatherneck Garage, Charles Gantt of The Makers Workbench, and Darryl Jones of Dreadknot Woodshop, introduce themselves by sharing a little of their background, what and how they like to Make, and why they wanted to create this podcast. They will also discuss some of their hopes and goals for the podcast.   For all things Making head to MakingTimePodcast.com and follow us on Facebook, Twitter, YouTube, and Inastagram.   You can follow Mike at LeatherneckGarage.com and on Facebook, Instagram, and YouTube. You can folllow Charles at TheMakersWorkbech.com and on Facebook, Instagram, and YouTube. You can follow Darryl at DreadKnotWoodshop.com and on Facebook, Instagram, and YouTube.